Cold storage door manufacturers tell you the cold storage door with high strength aluminum alloy door frame, high strength, no deformation, beautiful appearance, strong durability. The 2.0mm stainless steel edge is seamlessly welded around the door leaf, which is strong, no deformation, and reasonable in structure.

Cold storage door door leaf generally adopts polyurethane pressure syringe injection foaming type, polyurethane tissue is dense, evenly filled throughout the door, no shrinkage, smooth and beautiful appearance, with reliable thermal insulation performance.

The guide rail of the cold storage door is pressed and formed with high-strength hard anti-rust aluminum alloy. The inside of the guide rail adopts a floating door opening and closing system. When the cold storage door is opened, the cold storage aluminum door frame with sealing tape reduces friction. When the cold storage door is closed, the aluminum door frame is tightened according to the weight of the style to achieve the sealing effect. The hardware and accessories are made of stainless steel casting, the door parts are high precision, beautiful appearance, durable, the freezer door is light and flexible, safe, and easy to install. TPE environmental protection seal can provide better sealing performance and use performance for the freezer door.

Cold storage door frame, threshold, door leaf are equipped with two sets of electric heating antifreeze device, effectively prevent the combination of cold storage door and door frame and floor surface freezing. Safety hazard elimination device in the warehouse: When someone is accidentally locked in the freezer, as long as you pull a little internal danger ring, you can open the door smoothly and get out safely.

Cold storage door manufacturers tell you that the freezer is generally matched with the windshield, which can effectively reduce the cold loss of the freezer.

Cold storage door manufacturers tell you what are the characteristics of cold storage door?

Indoor combination freezer features are as follows:

1. Bump coupling connection using patented technology: factory assembled insulation board and bump coupling connection are adopted, which is convenient for on-site construction combination, disassembly and movement, increase and decrease of storage capacity, etc., and is convenient for increase and decrease of storage capacity.

2. The joint has good strength and heat insulation performance. The concave-convex joint of the new mechanism adopts a unique secondary locking technology, which further improves the strength and heat insulation performance of the joint.

3. Cold storage door: High-density polyurethane cold storage door uses 4 weeks of 2.0mm stainless steel muzzle to weld the entire frame to prevent long-term deformation of the cold storage door. There is a hair hot line around the door leaf, and a hot line is added around the door frame to prevent moisture and frost.

4. The freezer door has a safety device. A safety device is used on the door, and it is easy to escape by accidentally locking people in the freezer.

5. The combined freezer is equipped with an air pressure balance valve: the low-temperature freezer is equipped with an air pressure balance valve, which can balance the air pressure difference inside and outside the freezer when opening the door or melting.

Cold storage door manufacturers tell you what are the freezer engineering equipment?

1. Material formula should be equipped with freezer engineering design and construction material list, freezer, warehouse door, refrigerator, refrigeration evaporator (air cooler or exhaust pipe), microcomputer temperature control box, expansion valve, copper pipe connection, cable control line, warehouse lamp, sealant, installation auxiliary materials, etc., and check the materials and accessories model.

2. Before transportation and installation, the number of refrigerated warehouses caused by the single-core area should be coordinated with the shipment. The unloading should be handled with care. The joint between each layer of the warehouse board and the ground should be laid with a scratch-proof layer. 3. When assembling the entire freezer, a gap should be left on the wall and the roof. The floor of the freezer should be installed flat. In unfair places, the material should be used to level the backing plate, lock the lock between the plate and the plate, and seal with silica gel. The surface of the warehouse is flat and has no hollow core. After the top, bottom and lip plates of the freezer warehouse are installed, level and lock between the top and lip, bracket and floor.